Plinth step solution, Blum Space Step

  • CAD data available.
    Please select an article.
  • Specifications available.
    Please select an Item.

    Filter

    Complete your selection

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    Plinth step solution, Blum Space Step

    Note: The image may show a similar article

    Plinth step solution, Blum Space Step

    Nominal length: 410 mm

    Art. no. 558.66.500

    Plinth step solution, Blum Space Step

    Nominal length: 460 mm

    Art. no. 558.66.501
    Product details

    Material

    Aluminium and plastic

    Colour/finish

    Matt Orion grey

    Installation reference

    4 spring buffers are recommended from a cabinet width of more than 900 mm.
    Max. load: 150 kg. As the manufacturer, you are responsible for approving the actual load bearing capacity of the furniture item with Space Step that you have manufactured in accordance with EN-14183, and this must be specified on the manufacturer label.
    A 3-layer panel (3S) with thickness of at least 21 mm is recommended for the plinth step.
    The surface of the step must be non-slip. This can be realised using an anti-slip mat which is directly attached to the surface of the step, or by using a non-slip board material.
    Affixing the sticker: EN-14183 stipulates that the two provided stickers must be affixed.
    Pull out beneath Space-Step: Only 30 kg or 40 kg runners may be used. The dynamic load bearing capacity for the pull out below Space-Step is 20 kg.

    Supplied with

    2 Tandem drawer runners left/right
    2 upright profiles
    2 corner connectors
    2 upright feet
    2 shelf supports, rear
    1 front connector set (magnet and adhesive plate)
    4 spring buffers
    2 stickers (safety instructions and manufacturer information)
    14 flat head screws 4 x 15 mm
    Installation instructions

    Additional information attributes

    4 spring buffers are recommended from a cabinet width of more than 900 mm.
    Max. load: 150 kg. As the manufacturer, you are responsible for approving the actual load bearing capacity of the furniture item with Space Step that you have manufactured in accordance with EN-14183, and this must be specified on the manufacturer label.
    A 3-layer panel (3S) with thickness of at least 21 mm is recommended for the plinth step.
    The surface of the step must be non-slip. This can be realised using an anti-slip mat which is directly attached to the surface of the step, or by using a non-slip board material.
    Affixing the sticker: EN-14183 stipulates that the two provided stickers must be affixed.
    Pull out beneath Space-Step: Only 30 kg or 40 kg runners may be used. The dynamic load bearing capacity for the pull out below Space-Step is 20 kg.

    Complementary products and accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    18/01/2022